Will this forearm fit my No.4 Mk1*Long Branch

[BlitzKrieg]

Will as set of wood: forearm and butt stock for a No.4 Mk 2 fit my Long Branch No.4 Mk1*

IF so: will it look right or be half a##ed looking and will it funtion correctly for accuracy purposes?

[John Sukey]

Yes, it will fit, but the reverse is not true without modification due to the way the trigger is hung. There should be no problem with accuracy.

[Sunray]

Yep, but it may not be the same colour. If that matters to you.

[madcratebuilder]

The Mk2 well fit the MkI. Much of the Mk2 wood is beech or birch and much lighter in color.

[BlitzKrieg]

A quick question. I seem to recall if I use the Mk2 wood that I will have some empty holes in the forearm. Is that right. ?

[WHG]

Yes you will have an empty hole on each side of the forearm. The Mk2 uses a screw, where the Mk1 had rivets.

[John Sukey]

Actualy a nut and bolt. I would suggest the local hobby shop if it is missing, as they have some really tiny ones used on models.