IHC stock question

[jim70739]

I have been away from M1 Garands for awhile and have forgotton about all I picked up here in years past.
I need a little help with what serial number range would fit with an IHC stock with the number 2842 in the channel and a small wheel on the left hand side where other makers like SA would put them. It is a fairly nice little stock and I was wondering what vintage I need to look for to fit this wood.
Thank in advance.

[Johnny in Texas]

End of '52 Early '53 the stock is dated 284th day of '52 so it was used after that date and the crossed cannons were not used for very long into '53 under 4.5 mill s/n range most likely.

[kingpin]

I have a nice IHC Garand needing a stock like that.

Glen

[Johnny in Texas]

give details of your IHC needing the stock

[jim70739]

I don't have an IHC, I have the stock.Years ago when I was working M1's, I got this stock and understood then that it was one of the earliest made for IHC. I was/am looking for the serial number range in case I run across a receiver. I have more than enough parts including a LMR barrel to build an IHC to put in it.

[kingpin]

give details of your IHC needing the stock

# 4460_ _ _

Stock inside marked 1722 outside no visible markings

Barrel P LMR D6535448 3 53 A9 P M
Op Rod D6535382 IHC
Trigger Group IHC D6528290
Safety IHC
Hammer IHC C-5546008
Bolt D6528287 IHC